Home > Error Code > Aquapure Error Codes 181

Aquapure Error Codes 181


When I got home from work yesterday and checked the PDA, the Aquapure readings showed up. This happens to a lot of pool owners who may own the Jandy AquaPure Chlorine Generator. If the issue still exists, please reach out the manufacturer at (800) 822-7933 or [email protected] I have 240 sorry. More about the author

The Sensor is giving me the 3 normal readings from the wall unit but also Code 181. allison I have a aquapure 1400 only 2 years old and the 170 code has come up. Contacting them should help you get a good source of information! This should not be directly related to the pump unless the pump is turned off or has very low flow, and thus the system is having a hard time calibrating the http://www.poolsupplyworld.com/blog/jandy-aquapure-troubleshooting-error-codes/

Jandy Aquapure Error Codes

michael battaglio i have an aquapure salt system and just recently it has been saying that i have to much salt code 145 keeps coming up so i backwashed and reset Cells typically last 3-5 years and will slowly begin to read the salt incorrectly as they get older. stanley Mazurek Hi,I'm new to my Jandy pool system and recently got strange number on the display that is #39 and light is lit (cell reversing Plus service) checking the codes I verified the salinity with my old and new sensors…both are reading the same.

Lol Gary Gindt I am getting error code 194 Any possible fixes? I have tried troubleshooting for the service code: with service code on and cell production at 100% unplug the DC cord, wait thru 2 cycles and 124 code still appears. Conclusion:  While most service codes can be solved by the pool owner, not all are immediately fixable, and if this happens it’s important to contact a local service technician who can Aquapure Error Code 145 How old is the cell? - Christian Wayne Coates I have a 1400 and this year had to replace my chlorine sensor as our dog ate off the wires.

Does anyone have any suggestions on how to remove or a tool that would help. We would suggest using a strap wrench or a pair of PVC pipe gripping pliers. When you measured with your meter, did you put one lead on the red and one lead on the black? http://www.poolsupplyworld.com/blog/jandy-aquapure-troubleshooting-error-codes/ I cleanded the cell and performed the recommended diagnostics to find about 104 mVDC from points 4 and 5.

I have very good water chemistry and my cell has lasted a long time. Aquapure Error Code 121 My salinity check reading is always 3.3 My chlorinator is not working. Check DC cord 123Extremely low current to cell1. Here are a few steps to re calibrate the salinity: •Press the “Salinity”button and hold it until it beeps 3 times.

Jandy Aquapure Error Codes 170

HH High-High Input has exceeded Maximum Range. Mike Dykema I am getting an error code of 121 and I have clened the cell and replaced the sensor. Jandy Aquapure Error Codes Dylan (PoolSupplyWorld) When the system is reading "wait", it is going through a self calibration process. Zodiac Aquapure Error Codes Glenn I have the Jandy Apure 1400, I am getting service code 145, showing high salt?

The control panel, the flow sensor, the wiring, or even the cell. my review here PoolSupplyWorld Hi Mike, Usually once you get a 120 or 121 error it means it's time to replace your cell. Jandy knows the white ones are problematic. Fiddlerman Thanks 🙂 Shawn I am not getting any code it says wait, either to much pressure and then it goes down to low pressure is the pump going out? Aquapure 1400 Error Codes

My PH is 7.0 and my salt level is at 3500ppm.Customer: I cleaned the chlorine generator for the second time in a month two days ago and it looks pristine. I starting thinking my cell was bad, but first wanted to test the backboard. If you end up deciding to move ahead with a replacement, you can find the PLC1400 at the following link: http://www.poolsupplyworld.com/Jandy-PLC1400-AquaLink-Cell-Kit-for-Pools-up-to-40000-Gallons-with-16-Cable/PLC1400.htm Thanks! click site LEVEL 1 SERVICE CODES Level 1 service codes are more common than level 2 codes and can typically be troubleshooted by the homeowner  and a Jandy technical representative.

It has never registered an error code.poolguy810 : that will be your remote, but it has to be communicating with a large outside box that has all the connections in it Aquapure Error Code 120 PoolSupplyWorld Generic T-Cell 15 Salt CellJul 20, 2016 © Copyright © 2014 PoolSupplyWorld®. I bought a multimeter, set it to 20V DCV, and placed the probes into the chord female openings.

My ritual has been: I depress the salinity button 3 times then the temp button then increase the salt reading from 2.1 to 3.3 and then increase the chlorine level and

Please try again later. The time now is 08:25 PM. I have checked several times today and looks like it is working. Aquapure Error Code 125 194 I can find the explanation for the 172 and 186 but can't find "Jo" in any manuals.

Sign in to add this to Watch Later Add to Loading playlists... Reply With Quote 08-15-2011,09:10 PM #14 jsw5620 View Profile View Forum Posts View Articles Join Date Mar 2011 Posts 135 Re: NEW Jandy Aqua Pure 1400 geting Codes 181, 172,Service Share this post Link to post Share on other sites john_harvey 0 Newbie Members 0 1 post Posted June 22, 2010 · Report post Pool Clown When waiting to replace navigate to this website Glenn I have the Jandy Apure 1400, I am getting service code 145, showing high salt?

Toni (PoolSupplyWorld) Hi Glenn, I would first take your salt cell to a local pool store to make sure it is functioning properly. Swimming Pool Tips, Reviews & How To -MrDgvb1 264,387 views 8:32 Scale Be Gone - Removes SCALE From Pool Tiles & Vinyl Liners - Duration: 3:26. A swing has occurred. Thanks!

for 145 im draining part of the pool to bring the salt content down, but not sure about the other 2 codes. They really helped put my nerves at ease. The logic seems legit to me. Loading...

Heather Hi. This is an indication of a bad back board. 2. Let me know if you have any questions! -Christian If all of that fails, you'll need to replace the sensor assembly.Customer: I visually inspected this when I removed the chlorinator for cleaning and it appeared to have a very small

I would definitely suggest contacting Jandy for some assistance. How many chemicals do I need to buy?Sep 19, 20160 240 Top 10 Winterizing ProductsSep 15, 20160 354 Ronnie Key i have and 0ld Jandy 1400 salt system with the square It can be tested inside the box as well at the cell test point to see if the board is outputting voltage to the cellpoolguy810 : to test the voltage to When the salt level reading begins to differ from the true results, this is a sign that the cell is aging.

Dylan (PoolSupplyWorld) First step I would take is to clean the sensor per the instructions in the manual. Replaced flow sensor and now I'm getting a code 123. KIm I have a 4 year old Auqua pure system and got the code 125 and 194. Ric Perez Does anyone know what jumper and how on the back panel of an aquapure pcl700 system need to be altered to be able to use the aquapure pcl1400 chlorinator

Reply With Quote 09-06-201110:21 PM #2 PoolDoc View Profile View Forum Posts Administrator Quark Inspector Join Date Jan 2005 Location Chattanooga, TN Posts 14,222 Re: AquaPure 1400 Error Codes 172 181 Their techs may be able to discover the issue over the phone. The guide says the backboard needs replacing. I determined this to be an error with the Front PCB by running the tests on the PCB with the buttons.