Home > Application Error > Application Error 27101 Ghost
Application Error 27101 Ghost
The program booted to DOS and started writing, but always hung on closing the CD. It was showing a different and I do not have this filename at all. I suggest you try my method which is for creating a NEW backup, check that on hd just to make sure it is ok - I never bothered with this step, Depending on the arrangement of files on your original HD, you may find that you can't recover a significant number of files even though you have about 4GB of 'something' on check my blog
Re: Kernel upgrade from 700 to 720 in sap Follow SCNJive Software Version: 184.108.40.206 , revision: 201308121150.54f5b14.release_5_0_6_2 You don't have to restore the image through Ghost - just copy it to the hard disk before running the commands. First, I plan to use the smallest (has 10 CDR's) of the 3 tries I made to get good data to an image file recorded to CDR's and copy these to I configured PM to write the image in CD sized chunks (650MB) onto the other hard drive with verification and ended up with three files at best compression verified.
It is true BUT it is slow, especially slow for so many data, because only one path is rescued at a time. Went out today and bought an external USB drive. Isn't anyway to repair/fix the corrupted image or a way to fool the GhostExp so it can read part of the imagefile?
- You must create a new image file instead.
- CURRENT STATUS: I run the backup (to hard disk) using the (640 Mb) restricted file size as suggested, run an integrity check on the Hard Disk image(s) ---- Then copied these
- Both of these Integrity checks were run using the Ghost 2003 Boot Disk.Then, I used the NO compression Backup CDR,s; started the Integrity check in windows XP and it stopped at
This was OK, but I was not able to view the images with the Ghost Explorer. SymptomsYou are restoring an image to a smaller hard drive and get the above error even though the used space is well within required size. I used the 'show parameters control_file' and it show the wrong path and wrong file: D:\oracle\product\10.2.0\db_1\database\ctl1ecc.oraWhy is the system getting the wrong path and wrong file even though the paths were Then, (hopefully tomorrow); my next approach will be to use your suggestion and give that method a try.
http://www.pbase.com/vrain Reply Reply with quote Complain technicsplayer • Senior Member • Posts: 1,381 Re: Ghost 2003 Integrity Errors In reply to Vernon D Rainwater • Jul 8, 2004 this YaBB © 2000-2009. http://www.pbase.com/vrain Reply Reply with quote Complain Vernon D Rainwater OP • Forum Pro • Posts: 13,225 Re: Ghost 2003 Integrity Errors In reply to technicsplayer • Jul 9, 2004 http://www.pbase.com/vrain Reply Reply with quote Complain d70_europe • Senior Member • Posts: 1,208 Ghost 2003 is very buggy!
Just a thought Col.Thanks for your reply -- I am using XP Pro and the normal NTSF file-- hide signature --CORRECTION ------------------------------------------- NTFSsystem for XP so I don't believe that ScanDisk http://www.pbase.com/vrain Reply Reply with quote Complain technicsplayer • Senior Member • Posts: 1,381 Re: Ghost 2003 Integrity Errors In reply to Vernon D Rainwater • Jul 9, 2004 there I used 640 chunks because did not like filling cds too close to their capacity to avoid any possible future reading errors.Thanks for the reply. What error messages do you get after the commands?
Alert Moderator Like (0) Re: Ora-27101: shared memory realm does not exist Guest Jul 15, 2008 2:21 AM (in response to Fidel Vales) Currently Being Moderated Thank you everyone for your http://radified.com/cgi-bin/yabb2/YaBB.pl?num=1105463780 I think that I am not stitching the paste in correctly because I don't know what the format should look like. Covered by US Patent. Ghost does not include any features for repairing corrupted image files.
Hope you sort it out, Greetings-- hide signature -- Bernd TaegerHello Bernd, Thanks for your reply and suggestions. click site Don't have a SymAccount? The drive has 2 partitions as C and D. Note: the list of files does not necessarily correspond to the order they were stored on the HD to begin with.
Unfortunately, any file that had *data* that should have been backed up on imagefile0002 (or 0003, etc.) can't be recovered. Reboot the PC and I could read the full restored image. The -IGNOREINDEX switch opens Ghost Explorer and tells Ghost Explorer to find the files by reading directly from the image file, rather than from the index file. http://dis-lb.net/application-error/application-error-437-ghost.php I used 640 chunks because did not like filling cds too close to their capacity to avoid any possible future reading errors.Vernon D Rainwater wrote:Bernd Taeger wrote:Hello Vernon,Sorry I can't help
Many Thanks, -- Vernon... No Yes Products Products Home Threat Protection Advanced Threat Protection Endpoint Protection IT Management Suite Email Security.cloud Data Center Security Information Protection Data Loss Prevention Encryption Validation & ID Protection Managed I have one spfile in the %Oracle_Home%/dbs folder and another one in the %Oracle_Home%/database folder.
If you can't copy them from your cd is just means your cds are corrupted somehow, and that is why your integrity check fails.
IP Logged Pages: 1 ‹ Previous Topic | Next Topic › « Home ‹ Board Top of this page Forum Jump » Home » 10 most recent Posts » I configured PM to write the image in CD sized chunks (650MB) onto the other hard drive with verification and ended up with three files at best compression verified. Also, Backup/validate to Hard Disk completes without any errors OR problems. The program booted to DOS and started writing, but always hung on closing the CD.
I always get a CRC error. Just a thought Col.Thanks for your reply -- I am using XP Pro and the normal NTSF file system for XP so I don't believe that ScanDisk is a valid function Feel free to ask again if u can't figure out AFTER 10 DAYS(i.e. More about the author so i think you have to rebuild those jpg's and PSD's.. 0 LVL 1 Overall: Level 1 Storage 1 Message Expert Comment by:DreamlandLabs2003-10-13 Jake74 - I'm sure you didn't get
After many times and a few toasters later, I gave up on the idea to burn to CD from DOS. chọn ổ đĩa cần kiểm tra 4. Also, do you mean Ghost 2003? If you can't copy them from your cd is just means your cds are corrupted somehow, and that is why your integrity check fails.I suggest you try my method which is
Like (0) Re: Ora-27101: shared memory realm does not exist Guest Jul 15, 2008 2:27 AM (in response to Guest ) Currently Being Moderated Solution posted in detail in the thread. Of course, that function is not available for the CDR and CD-RW Drives.The Ghost image backup of C and D to another Hard Drive was ok with NO errors during the I've never heard of a version 3 - not that there wasn't one, but the steps below are for current versions of Ghost. Login Register Incoming Links Re: SAP ECCEHP7 upgrade stuck in phase 'PREP_INPUT/READCVERS_DUMP'.
Recovering important files If there are files in the image that you must recover, try opening the image file with Ghost Explorer to extract the files needed. When I don't use any tags and open ghostexp normal and swap out the disks a million times, I get further before getting that message on a different disk. I backup much more frequently to image file and place on another Hard Disk but I also try to (ever so often) backup (also) to CDR so I have the provisions Problem was that my files were all fragmented and strewn across the disks, as soon as it found the corruption it stopped, no matter what combo of flags.
I configured PM to write the image in CD sized chunks (650MB) onto the other hard drive with verification and ended up with three files at best compression verified. then burn normal data cds with each of the 640MB chunks, obviously labelling in order. The dispatcher in the MMC is now working fine. To effectively size & tune up applications l… Storage Windows Server 2012 – Configuring as an iSCSI Target Video by: Rodney This tutorial will walk an individual through the process of
Reading mode: Light Dark Login | Register NewsReviewsArticlesBuying GuideSample ImagesVideosCamerasLensesPhonesPrintersForumsGalleriesChallenges Forum indexPC TalkChange forum Ghost 2003 Integrity Errors Started Jul 8, 2004 | Discussions Shop cameras & lenses ▾ Forum ‹Previous12Next› Thanks 0 Message Expert Comment by:m3_del2005-02-02 The guy that is talking about the hex editing seems to be trying to boost his ego. Translated Content This is machine translated content Login to Subscribe Please login to set up your subscription.